Categories
Specials

Meike TTL MK-950 Flash for CANON

Meike TTL MK-950 Flash for CANON
Brand: MEIKE
Product Code: MK-950-C
Reward Points: 0
Availability: In Stock
Price: RM350
   - OR -   

Description:
The MeiKe MK950 adds a range of features such as Canon E-TTL, an LCD screen and stroboscopic mode.It is compatible with Canon camera with the Canon standard hot shoe mount.

  • TTL mode, TTL mode is the default mode after turn on flash , through key to adjust exposuring guild number, available adjustable scope is negative 3 positive 3, through the personal needs to setting and using

 

  • M Mode, Under the M mode, through the button to adjust the light flash brightness, flash brightness adjusting range is 1/128-1/1. have eight levels brightness, only need to set range of flash brightness when using.

  • Stroboscopic mode, Under the stroboscopic mode, through the button to adjust the light flash brightness, flash brightness adjusting rang is 1/128-1/1. have eight levels brightness, when press “SET” key, can adjust the Hz of flash, Hz range is 0-90, after finished set then press the “SET” button to adjust times of stroboscopic, stroboscopic adjustable range is 0-50, press “SET” button again to save and quit this setting

  • S1/S2 Modes, Flash default mode is S1 mode, if when need join the S2 mode, can through press “SET” and if flicker at current mode, can shift another mode through key

  • S1 Mode, it will work with the first work of the master flash synchronously in this mode, with the suit consistent with the use of radio slave. To use this mode correctly, the master flash should be set at manual flash and the TTL flash system with preflight function and the red-reduction function with multiple flashes should not be used

  • S2 Mode, It is also called “pre-flash cancel mode”. This mode is similar with S1 mode, but it can neglect the pre-flash given by TTL flash. Therefore it can support the main flash working in TTL mode. In particular, if S1 mode can not flash correctly and synchronous with your internal flash, you can try to use Test Flash, Whether in any mode, you can press PILOT button to test if the flash light flashed normally. When testing the flash, the flash will give flash at relevant output level in accordance with the chosen output power setting.


FEATURES

  • The improved wireless triggering sensor: Meike improves the wireless triggering sensor for MK950, which makes the s1 and s2 mode can mode can be used in outdoor environment and the wireless triggering distance is up to 20-30m indoor, 10-12m outdoor
  • New charging socket for external power pack: adds a charging socket for external power pack, power pack, to meet your higher demand for charging recycle.
  • New PC synchronous port: adds a standard pc synchronous port, which makes it simple for you to use the pc synchronous line.
  • Super speed of charging recycle: it only takes 3 seconds in charging after full power output: even without new batteries, you can get the super charging speed than it only needs 4-5 seconds; you can use the external power pack to accelerate the charging speed once more.
  • The improved power saving mode: in the power saving mode, the flash will get automatic shutdown sooner; in the non-saving mode, it will take a longer time before automatic shutdown
  • Supporting highspeed continuous shooting: Under the output level of 1/8 or below, MK950 can support the 8fps high speed continuous shooting.
  • Fits Models: Canon 5D/60D/550D/50D/450D/500D/600D/7D/5D Mark Il
  • Specification
    Guide Number 53 meters (ISO 100,85mm)
    Flash mode TTL/M/Stroboscopic/S1/S2
    Vertical rotation angle 0-90 degrees
    Horizontal rotation angle 0-270 degrees
    Flashing times 100-1500 times (AA alkaline cell used)
    Recycle time Approx 3s
    Color temperature 5600k
    Flash speed 1/500s-1/20000s
    Brightness control 8 levels of output control (1/128-1/1)
    External interface Hot shoe, PC port and eternal charging port
    Wireless triggering distance 20-30m indoor, 10-12m outdoor
    Additional Features Sound indicator, PC port, Power saving mode and over heat protection
    Dimensions 200*75*57 mm
    Net weight

    370g

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: